Over its long life, this guitar had various screw holes made on top to install different bridges and tail pieces to improve the intonation and playability. Also, for better lower...
Posted by |
Some vintage guitar pickguards attract bids over $3,000. That may seem insane, but, as a matter of fact, the material used to make old pickguards is different from new ones...
Posted by |
This is the ES175, one of the most popular full hollow-body guitars made by Gibson. The part where the neck meets the head is the weakest spot on the whole...
Posted by |
This kind of problem is very common. The crack was glued without clamping or finishing. That's why dust or sweat was rubbed into the cracks every time someone touched it....
Posted by |
This is a square-neck Resonator guitar, which is a very famous metal body guitar made by National. In this case, there was a crack alongside the machine head holes on...
Posted by |
This repair is a perfect example of how difficult it is to do a minimum amount of repair work while retaining as many original parts as possible. This is the...
Posted by |
Converting a fretted bass to fretless is common, but this case is unusual. Usually, the fret slots are filled with wood or resin to do the conversion. But this owner,...
Posted by |
The Fender applies finish after the frets are installed on a maple neck. Especially on the 1970s maple neck, the polyurethane finish is so thick that half of the fret...
Posted by |
This vintage Martin guitar has a typical beautiful Brazilian rosewood grain. (It's the same guitar shown on the previous page.) I used some old Brazilian rosewood from my scraps drawer...
Posted by |
Repairing vintage Martin with a transplanting technique. This Martin '45 Model 000-28 was damaged and missing parts of the wood. The most difficult element involved in repairing an old instrument...
